LIMITED RELEASE - Hotfix XAE500W2K8X64076 - For Citrix XenApp 5.0 for Windows Server 2008 x64

Hotfix package name: XAE500W2K8X64076.MSP
For: Citrix XenApp 5.0 for Windows Server 2008 64-bit Edition
Replaces: XAE500W2K8X64001, XAE500W2K8X64003, XAE500W2K8X64004, XAE500W2K8X64008, XAE500W2K8X64009, XAE500W2K8X64011, XAE500W2K8X64022, XAE500W2K8X64023, XAE500W2K8X64032, XAE500W2K8X64033, XAE500W2K8X64036, XAE500W2K8X64042, XAE500W2K8X64044, XAE500W2K8X64048, XAE500W2K8X64060, XAE500W2K8X64070, XAE500W2K8X64071
Date: April, 2011
Language supported: English (US)
Readme version: 1.01

Readme Revision History

Version	Date	Change Description
1.01	September, 2011	Added Important Note #2
1.00	April, 2011	Initial release

Important Note(s) about This Release

1. Important: Installing this hotfix over an ICA session is not supported but you can install it through a remote desktop session using an administrator account.
2. Important: Hotfix Rollup Pack 1 invalidates this hotfix in full or in part. As a result, applying Hotfix Rollup Pack 1 on top of this hotfix can cause application launch failure. If affected, install Hotfix XAE500R01W2K8X64014 after applying Hotfix Rollup Pack 1 to resolve the issue. For a complete list of post-Hotfix Rollup Pack 1 hotfixes replacing this hotfix, see the table of Invalidated Hotfixes of the Hotfix Rollup Pack 1 readme.
3. Caution! This hotfix may require you to edit the registry. Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. Citrix cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.

Important Disclaimer - Limited Release Hotfix

This limited release hotfix is available only upon request. Contact Citrix technical support to obtain the hotfix package. The fix(es) or enhancement(s) contained in this hotfix will be included in a future service pack, hotfix rollup pack, or version release for this product. Testing of this hotfix was targeted only at the affected functionality, and regression and stress testing were minimal. Therefore, this hotfix might cause undesirable and unknown side effects. Introduce this hotfix to a test environment for evaluation before deploying it to a production environment. Your use of this hotfix is at your own risk.

TO THE EXTENT PERMITTED BY APPLICABLE LAW, CITRIX AND ITS SUPPLIERS MAKE AND YOU RECEIVE NO WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, AND CITRIX AND ITS SUPPLIERS SPECIFICALLY DISCLAIM WITH RESPECT TO THE HOTFIX ANY CONDITIONS OF QUALITY, AVAILABILITY, RELIABILITY, SECURITY, LACK OF VIRUSES, BUGS OR ERRORS, OR SUPPORT AND ANY IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER CITRIX, NOR ITS SUPPLIERS SHALL BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL, MULTIPLE, PUNITIVE OR OTHER DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF DATA, LOSS OF INCOME, LOSS OF OPPORTUNITY, LOST PROFITS, COSTS OF RECOVERY OR ANY OTHER DAMAGES), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, AND WHETHER OR NOT FOR BREACH OF CONTRACT, NEGLIGENCE OR OTHERWISE, AND WHETHER OR NOT CITRIX, ITS SUPPLIERS, OR LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Where to Find Documentation

This document describes the issue(s) resolved by this release and includes installation instructions. For additional product information, see Citrix eDocs, the Citrix Product Documentation Library.

New Fixes in This Release

1. Under certain circumstances, disconnected sessions do not reconnect.

   [From XAE500W2K8X64076][#175501]

2. Users might experience delays logging on when the domain controller is offline.

   [From XAE500W2K8X64076][#195628]

3. Servers might experience a fatal exception, displaying a blue screen. The dump file displays: "PAGE_FAULT_IN_NONPAGED_AREA (50) at vdtw30!PublishEverything+0x1b."

   [From XAE500W2K8X64076][#243393]

4. This is an enhancement aiming to increase the robustness of the Automatic Client Reconnection feature.

   [From XAE500W2K8X64076][#247586]

5. At times of heavy server utilization, published applications can fail to launch. Instead, double-clicking an application icon causes the application to connect to the session but the session logs off immediately, without launching the application.

   [From XAE500W2K8X64076][#249027]

6. Configuring the NetScaler Citrix XML Service monitor probe to point to a server running XenApp 5 for Windows Server 2008 causes the load on that server to increase to 9,990 as evidenced by running the qfarm /load output command. As a result, the server refuses to accept new connections as long as it is being monitored.

   [From XAE500W2K8X64076][#256301]

Fixes from Replaced Hotfixes

1. In order to meet Microsoft Windows Server 2008 certification requirements, this update provides Authenticode signing for the ctxrdpwsx.dll, ImaSrv.exe, and wsxica.dll files.

   [From XAE500W2K8X64001][#197616]

2. Servers might become unresponsive when enumerating applications.

   [From XAE500W2K8X64003][#203748]

3. Changes you make to the configuration of the CPU Utilization Management feature do not get included in the Configuration Logging report.

   [From XAE500W2K8X64004][#198142]

4. Important: Make sure to read the Important Notes section before installing this hotfix.

   This enhancement is a part of a product simplification effort that removes a number of licensing related complexities. Specifically, with this enhancement:

   • All licensed users of XenApp Advanced, Enterprise, or Platinum hosted applications are also entitled to use the Application streaming feature on their end-user devices in desktop/offline mode without requiring separate licenses
   • The requirement for a "Citrix Streaming Users" Active Directory group is no longer needed
   • Annoyance popup messages that remind administrators and users of the remaining grace period of Technology Preview, Beta, and Early Releases no longer appear

   Important: For this enhancement to take effect, you must also install the following Access Management Console hotfix(es):

   • For XenApp 5.0 for Microsoft Windows Server 2008: PresentationServer_5.0.1

   Note: After installing this fix, servers configured as XML brokers consume two start-up licenses rather than one.

   [From XAE500W2K8X64004][#205609]

5. This is an enhancement that allows users to view a preview of their printed document using the Citrix Universal Printer. After applying this fix, you must set the following registry key:

   On 32-bit Windows:

   HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\print
   Name: DefaultPrnFlags
   Type: REG_DWORD
   Data: 0x10000

   On 64-bit Windows:

   HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Citrix\Print
   Name: DefaultPrnFlags
   Type: REG_DWORD
   Data: 0x10000

   If a value for this key exists, add 0x10000 to the existing value. For example, a value of 0x20 becomes 0x10020.

   [From XAE500W2K8X64008][#175118]

6. Depending on the selected paper type, print previews and printouts using the Citrix Universal Printer are improperly scaled and aligned. This results in page margins and font placements that are different from those of the original document. This is the server-side component of a fix that resolves the issue. To resolve the issue in its entirety, you must also install client-side Fix #198079.

   [From XAE500W2K8X64008][#198079]

7. An encoding issue might prevent print jobs utilizing the XPS printer driver from completing. The following error message appears instead: "parameter is incorrect."

   [From XAE500W2K8X64008][#206182]

8. Pass-through authentication is not available when accessing a published application from within a published desktop on XenApp 5.0 for Windows 2008 servers. Instead, the user must provide valid credentials to launch a session within a desktop session even when pass-through authentication is enabled in the plugin. To resolve this issue, you must install a server-side hotfix for XenApp 5.0 for Windows 2008 that contains Fix #194894.

   [From XAE500W2K8X64009][#194894]

9. In a high latency environment, applications which write a large amount of data to a client mapped drive using several small write requests might cause performance issues.

   After applying this fix, use the console to configure a Citrix Policy that enables Asynchronous Writes, then apply the policy to the users or servers as needed to resolve this issue.

   [From XAE500W2K8X64009][#198090]

10. Incorrect fonts might appear in printouts. Font substitution occurs when fonts installed on the client device fail to be included in the spool file. To enable this fix, you must also deploy the corresponding client-side Fix #179220.

    [From XAE500W2K8X64011][#179220]

11. After applying Fix #179220, the print spooler might stop responding. To enable this fix, you must also deploy the corresponding client-side Fix #192617.

    [From XAE500W2K8X64011][#192617]

12. After applying Fix #179220, the size of PDF print spooler files grows unexpectedly large; some font substitutions might also occur. To enable this fix, you must also deploy the corresponding client-side Fix #201114.

    [From XAE500W2K8X64011][#201114]

13. The size of EMF spool files can be very large if the document to be printed contains a large number of fonts. This enhancement introduces support for a registry key that allows you to fine-tune in a more granular way what fonts to include in the spool file:

    HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\Print
    Name: IncludeFonts
    Type: REG_SZ
    Data: All, None, Required, Legacy*

    * All = Include all fonts contained in the document; None = Include no fonts; Required = Include differential of fonts contained in the document but not available on the printer; Legacy = Include client fonts

    [From XAE500W2K8X64011][#206372]

14. On systems where Fixes #202900, #195908, or #179220 are installed, the Citrix Print Manager Service (CpSvc.exe) uses excessive amounts of memory when printing to legacy printers.

    [From XAE500W2K8X64011][#207148]

15. On systems where Fixes #179220, #192617, or #201114 are installed, the Citrix Print Manager Service (CpSvc.exe) uses excessive amounts of memory when printing to legacy printers and might exit unexpectedly.

    [From XAE500W2K8X64011][#207157]

16. Cross-server shadowing does not work on Windows Server 2008 unless you set the "Remote Control" permission on the ICA listener.

    [From XAE500W2K8X64023][#206699]

17. The Access Management Console displays a session as active even if it is disconnected after the idle time-out as set through Terminal Services configuration has elapsed.

    [From XAE500W2K8X64023][#206969]

18. Cross-server shadowing of sessions running on Windows Server 2008 fails.

    [From XAE500W2K8X64023][#208207]

19. Anonymous user accounts are not returned to the pool of anonymous accounts after a session is disconnected and reset. As a result, the account is eventually used up even though the account limit is not reached. For more information about Troubleshooting Common Anonymous User Account Scenarios, see Knowledge Center article CTX153078.

    [From XAE500W2K8X64023][#209610]

20. When attempting to shadow a user on a different server, some user sessions running on that server might not enumerate.

    [From XAE500W2K8X64023][#216167]

21. When attempting to shadow from a shadow taskbar running inside an RDP session and selecting a user on a different server to be shadowed, the shadow session fails. The following error message appears instead: "Session no longer exists on the server."

    [From XAE500W2K8X64023][#218083]

22. The ICA Listener setting "By default, connect only the client's main printer" is not honored on Windows Server 2008.

    [From XAE500W2K8X64032][#199378]

23. The Citrix Print Manager Service (cpsvc.exe) might exit unexpectedly and continue to exit after manually restarting it.

    [From XAE500W2K8X64032][#215074]

24. Servers might experience a fatal exception, displaying a blue screen, on wdica.sys with stop code 0x50s.

    [From XAE500W2K8X64033][#210814]

25. On systems where Fix #209610 is installed, licenses are not properly released when user sessions are logged off or disconnected.

    [From XAE500W2K8X64033][#219896]

26. If the presenter starts a Microsoft Office Live Meeting inside an ICA session, attendees cannot see the meeting onscreen.

    [From XAE500W2K8X64036][#219170]

27. HDX IntelliCache:

    This feature enhancement enables the Citrix Branch Repeater appliance to perform cross-session data compression for XenApp traffic. Cross-session compression reduces and streamlines traffic sent over the wide area network (WAN) when used in conjunction with the Branch Repeater TCP flow control and ICA-aware Quality-of-Service (QoS).

    For users behind one Branch Repeater appliance, this data compression can be utilized by sessions that contain compressible traffic, such as:

    • Sessions for text-heavy applications (such as a word processing application) of identical window size and resolution in owned by multiple users
    • Single-user sessions of fixed window size and resolutions scrolling through a text-heavy document
    • Printing identical files inside a single session, multiple users printing identical files
    • Repetitive file transfers, such as to and from mapped client drives, such as uploading or downloading email attachments

    After applying this release to the appropriate servers in your environment, you can adjust the listed registry settings on each server as needed. You must disconnect, then reconnect any session used for testing after a registry change is made to verify the effect of the registry change.

    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Citrix\WanScaler
    Name: UchBehavior
    Type: REG_DWORD
    Data: see chart

    Value	Behavior
    0	The universal cache handling information is not reported by the server.
    1	The universal cache handling information is always reported by the server.
    2	The universal cache handling information is reported by the server if a Branch Repeater device is used to optimize the client connection between servers and clients. This is the default value.

    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Citrix\WanScaler
    Name: EnableWanScalerOptimization
    Type: REG_DWORD
    Data: see chart

    Value	Behavior
    0	Disable Branch Repeater optimization.
    1	Enable Branch Repeater optimization. This is the default value.

    Note: If secure client traffic is blocked from optimization (EnableForSecureIca), the EnableWanScalerOptimization settings are ignored and no optimizations are utilized for secure sessions.

    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Citrix\WanScaler
    Name: EnableForSecureIca
    Type: REG_DWORD
    Data: see chart

    Value	Behavior
    0	Disable Branch Repeater optimization for secure connections. This is the default value.
    1	Enable Branch Repeater optimization for secure connections.

    [From XAE500W2K8X64042][#194626]

28. Certain user activities, particularly prolonged panning in memory-intensive graphics applications, can cause server memory consumption to grow to almost 100 percent. As a result, the session becomes unresponsive and the server refuses to accept new connections until it is restarted.

    [From XAE500W2K8X64042][#201274]

29. Servers might experience a fatal exception on vdtw30.dll while shadowing sessions.

    [From XAE500W2K8X64042][#206620]

30. Servers where Fix #160592 is installed might experience a fatal exception, displaying a blue screen, on vdtw30.dll.

    [From XAE500W2K8X64044][#204955]

31. Servers might experience a fatal exception, displaying a blue screen, with bugcheck code 3B.

    [From XAE500W2K8X64044][#218613]

32. This hotfix contains a server stability fix for XenApp.

    [From XAE500W2K8X64048][#208911]

33. On systems with Fix #211736 installed, session printer autocreation fails on occasion.

    [From XAE500W2K8X64048][#226969]

34. On systems with Fix #197616 installed, Terminal Services refuses to accept connections.

    [From XAE500W2K8X64060][#220936]

35. After refreshing, custom administrators might not see the entire number of sessions in the Access Management Console.

    [From XAE500W2K8X64070][#201270]

36. Custom administrators can see and manage published applications without permissions to do so.

    [From XAE500W2K8X64070][#206929]

37. After installing Hotfix Rollup Pack 3, the system beep no longer works.

    [From XAE500W2K8X64070][#208760]

38. Users might not be able to connect when there are communication problems between the server and the license server. After applying this fix, the connection to the license server is reinitialized when communication errors occur and the following message is written to the System Event log:

    Source: MetaFrame
    Event ID: 9034
    Description: A Citrix licensing request has timed out. This might be an indication of communication problems between this server and the license server. As a result, the server has reinitialized its connection with the license server. All licenses checked out by this server have been checked back in and attempts will be made to check the licenses out again.

    Reinitiating the connection to the license server works around temporary communication problems. However, if the event is logged repeatedly, Citrix recommends that you investigate your network health.

    [From XAE500W2K8X64070][#209944]

39. Changes to client printer mapping policies are applied to new sessions, but do not take effect for reconnected sessions. With this fix, printing policies are refreshed upon reconnect and session printers rebuilt accordingly.

    [From XAE500W2K8X64070][#220641]

40. This fix addresses a reliability issue with the Citrix Print Manager Service, CpSvc.exe.

    [From XAE500W2K8X64070][#223002]

41. When connected to a published desktop or to an instance of Windows Media Player published on XenApp 5 running on Windows Server 2008, Macintosh clients lack audio capabilities. The issue occurs because the server fails to enable the proper audio device for those clients.

    [From XAE500W2K8X64070][#223323]

42. When using a UPD driver for autocreated printers, the system occasionally experiences a fatal exception with stop code 0x0000003B.

    [From XAE500W2K8X64070][#223697]

43. Local printer properties might not be properly applied to session printers.

    [From XAE500W2K8X64070][#223899]

44. On occasion, session logoffs fail and the following notification appears: "Please wait for System Event Notification Service." Attempts to reconnect to such sessions fail as well, while new sessions can be launched without issues.

    [From XAE500W2K8X64070][#224169]

45. An error occurs when custom administrators attempt to enumerate users while RADE sessions are present.

    [From XAE500W2K8X64070][#224357]

46. Terminal Services might exit unexpectedly at shutdown.

    [From XAE500W2K8X64070][#226749]

47. The server restart message that appears in user sessions before a scheduled server restarts ("The Citrix XenApp you are using will be restarted in X minutes. Please save all data and log off. Any unsaved data will be lost") is missing the word "server" after Citrix XenApp.

    [From XAE500W2K8X64070][#229526]

48. Vdtw30.dll can cause servers to become unresponsive.

    [From XAE500W2K8X64070][#229659]

49. If the security setting "System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing" is enabled, RDP connections fail.

    [From XAE500W2K8X64070][#230249]

50. On systems with Fix #220641 installed, session printers are deleted when legacy printer naming is in use or when an administrator account with permissions to manage printers (HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Citrix\Print\DefaultPrnFlags = 0x4000) reconnects to a disconnected session after changing printing policies.

    [From XAE500W2K8X64070][#230833]

51. The "Allow only one instance of the application for each user" application limit, set under advanced application properties in the Delivery Services Console, is not honored for applications that are streamed to server. As a result, a single user can launch multiple instances of the application.

    [From XAE500W2K8X64070][#232777]

52. In scenarios where the XenApp Acceleration feature of Branch Repeater 5.5 is enabled (default) to compress and accelerate ICA traffic over WANs, shadowing a published desktop session across the WAN can cause the client session to disconnect unexpectedly.

    [From XAE500W2K8X64070][#236597]

53. Session enumeration - from the console or using MFCOM scripts - can be slow for custom administrators.

    [From XAE500W2K8X64070][#239806]

54. EdgeSight does not properly collect data for published desktop launches and does not properly display such data in its reports.

    [From XAE500W2K8X64071][#240414]

Installing and Uninstalling This Release

Notes:

• This hotfix is packaged with Microsoft Windows Installer 3.0 as a .msp file. For more information about deploying .msp files, see Microsoft article 884016 or visit the Microsoft Web site and search on keyword msiexec.
• This installer program complies with Microsoft User Account Control (UAC). If UAC is enabled, you must run the installer program in elevated mode; that is, with administrative privileges enabled. For more information about UAC, see Microsoft TechNet or visit the Microsoft Web site and search on keyword UAC.
• To install this hotfix successfully, servers must not have registry modification restrictions in place.
• Slipstreaming - installations of the XenApp Server base product packaged with one or more individual hotfixes - is not supported and might leave servers in an unstable state.
• This hotfix might or might not prompt you to restart the server when the installation or uninstallation is complete. If you are using the Access Management Console, you must restart the server after installing or uninstalling this hotfix to ensure that the hotfix is added to or removed from the console's hotfix inventory list.
• If the need arises to restore the original settings and functionality provided by this hotfix, you must uninstall the hotfix before reinstalling it according to the installation instructions below.

To install this hotfix:

1. Copy the hotfix package to an empty folder on the hard drive of the server you want to update.
2. Close all applications.
3. Run the executable.
4. Restart the server.
5. If you are using the Access Management Console, restart the server to ensure the hotfix is added to the console's hotfix inventory list.

To uninstall this hotfix:

1. From the Start menu, select Control Panel > Programs and Features.
2. Highlight the hotfix you want to uninstall and click Uninstall.
3. Follow the directions on-screen.
4. If you are using the Access Management Console, restart the server to ensure the hotfix is removed from the console's hotfix inventory list.

Files Updated (All Dates/Times UTC)

File Name	Date	Time	Size
cdfdrv.sys	04/21/2011	23:03	38,448
cdmprov.dll	04/22/2011	02:05	99,760
CitrixUpd.txt	04/21/2011	23:03	50
CitrixXps.txt	04/21/2011	23:03	50
Citrixxps.xml	04/21/2011	23:03	158
ComPlugin.dll	04/22/2011	02:05	22,968
CPatch.exe	04/22/2011	02:41	267,680
CPatchUI.dll	04/22/2011	02:41	12,192
Cpproc.dll	04/21/2011	23:03	22,952
cpprov.dll	04/22/2011	02:05	178,096
CPR232469.vbs	04/22/2011	02:41	975
CpSvc.exe	04/22/2011	02:06	604,592
Cpupdrv.dll	04/21/2011	23:03	162,424
Cpupdui.dll	04/21/2011	23:03	215,464
Cpxpsupdui.dll	04/21/2011	23:03	399,792
ctxhfloader.dll	04/22/2011	02:43	275,880
ctxprn64.dll	04/22/2011	02:06	135,096
ctxrdpwsx.dll	04/22/2011	02:06	119,736
ctxrpc64.dll	04/22/2011	02:06	44,984
cupdres_de.dll	04/21/2011	23:03	83,376
cupdres_en.dll	04/21/2011	23:03	83,376
cupdres_es.dll	04/21/2011	23:03	83,376
cupdres_fr.dll	04/21/2011	23:03	83,376
cupdres_ja.dll	04/21/2011	23:03	83,376
DefaultCapabilities.xml	04/21/2011	23:03	81,429
MFErrorUI.dll	04/22/2011	02:07	29,112
msi50ca.dll	04/22/2011	02:43	386,464
SemsComHosting.dll	04/22/2011	02:07	17,344
SemsComLibrary.dll	04/22/2011	02:07	26,560
SemsComLibrary.tlb	04/20/2011	19:42	7,284
SemsComPluginTypes.dll	04/22/2011	02:07	11,720
SemsComPluginTypes.tlb	04/20/2011	20:15	3,956
SemsLibrary.dll	04/22/2011	02:07	120,760
SemsService.exe	04/22/2011	02:07	42,936
vdtw30.dll	04/22/2011	02:15	793,408
wdica.sys	04/22/2011	02:16	628,032
wfapi64.dll	04/22/2011	02:08	156,080
wsxica.dll	04/22/2011	02:08	2,179,504
cdfdrv.cat (driverfiles)	04/21/2011	23:03	7,477
citrixupd.cat (driverfiles)	04/21/2011	23:03	12,740
CitrixUpd.inf (driverfiles)	04/21/2011	23:03	2,771
wdica.cat (driverfiles)	04/22/2011	02:15	6,917
wdica.inf (driverfiles)	04/22/2011	02:15	1,697
cdfdrv.sys (x32)	04/21/2011	23:03	31,280
CdfSvc.exe (x32)	04/21/2011	23:03	320,832
CdfSvcPS.dll (x32)	04/21/2011	23:03	111,944
cdmprov.dll (x32)	04/22/2011	02:16	87,984
Citrix.Diagnostics.dll (x32)	04/21/2011	23:03	42,328
Citrix.Diagnostics.Recorder.Cdf.dll (x32)	04/21/2011	23:03	38,264
CitrixUpd.txt (x32)	04/07/2011	14:19	50
CitrixXps.txt (x32)	04/07/2011	14:19	50
Citrixxps.xml (x32)	04/07/2011	14:19	158
ComPlugin.dll (x32)	04/22/2011	02:16	22,968
ctxprn.dll (x32)	04/22/2011	02:17	116,656
ctxrpc.dll (x32)	04/22/2011	02:17	37,808
cupdres_de.dll (x32)	04/21/2011	23:03	83,376
cupdres_en.dll (x32)	04/21/2011	23:03	83,376
cupdres_es.dll (x32)	04/21/2011	23:03	83,376
cupdres_fr.dll (x32)	04/21/2011	23:03	83,376
cupdres_ja.dll (x32)	04/21/2011	23:03	83,376
DefaultCapabilities.xml (x32)	04/07/2011	14:19	81,429
icactls.dll (x32)	04/22/2011	02:18	128,944
icast.exe (x32)	04/22/2011	02:18	22,960
ImaObjectPermissions.dll (x32)	04/22/2011	02:18	83,920
ImaSrv.exe (x32)	04/22/2011	02:18	153,520
ImaSrvSs.dll (x32)	04/22/2011	02:18	1,800,120
MfAppSs.dll (x32)	04/22/2011	02:18	546,736
MFErrorUI.dll (x32)	04/22/2011	02:18	29,112
MfRpcSs.dll (x32)	04/22/2011	02:19	358,320
MfSrvSs.dll (x32)	04/22/2011	02:19	2,787,248
policy.1.0.Citrix.Diagnostics.config (x32)	04/21/2011	23:03	597
policy.1.0.Citrix.Diagnostics.dll (x32)	04/21/2011	23:03	13,360
RADEAppSs.dll (x32)	04/22/2011	02:19	206,776
RADESessionSs.dll (x32)	04/22/2011	02:19	1,705,920
SemsComHosting.dll (x32)	04/22/2011	02:19	17,344
SemsComLibrary.dll (x32)	04/22/2011	02:19	26,560
SemsComLibrary.tlb (x32)	04/20/2011	17:58	7,284
SemsComPluginTypes.dll (x32)	04/22/2011	02:19	11,720
SemsComPluginTypes.tlb (x32)	04/20/2011	19:04	3,956
SemsLibrary.dll (x32)	04/22/2011	02:19	120,760
SemsService.exe (x32)	04/22/2011	02:19	42,936
wfapi.dll (x32)	04/22/2011	02:20	149,424
wshadow.exe (x32)	04/22/2011	02:20	206,768
cdfdrv.cat (x32\driverfiles)	04/21/2011	23:03	7,420
cdfdrv.inf (x32\driverfiles)	04/21/2011	23:03	1,777
??
File Name	MD5 Checksum
XAE500W2K8X64076.msp	F296B05B75E189934552D07765307C16
cdfdrv.sys	3D461E1EE3D0C773377301A31217C5AD
cdmprov.dll	914928D4A7D3E1F1D7B337A71B4A90A8
CitrixUpd.txt	229724BBF021E9C6CDB2959A2E355341
CitrixXps.txt	229724BBF021E9C6CDB2959A2E355341
Citrixxps.xml	26508E14D1E3C685D07B24DC952F7EF3
ComPlugin.dll	B5A85AAA74DC6ABB7875AD94C6BA33AC
CPatch.exe	5656751AC6740C680891446F117F8235
CPatchUI.dll	A344EC488811B093F7E6B59EB08C0939
Cpproc.dll	C2561C4B333EDEBAD6A20CDA1425630F
cpprov.dll	6318C4AD8EED3458874161B07A3C12FA
CPR232469.vbs	D5BB5BC7654752DD446105D6041A60EE
CpSvc.exe	BE89ED732DB796D33C392B50F08F7722
Cpupdrv.dll	98E5B2DD5DF173659D6AB6955A076E3C
Cpupdui.dll	92AAD4873D26D81837E0C92EB91999CE
Cpxpsupdui.dll	36C26B93E33121F1BA82847D12EC1BCC
ctxhfloader.dll	0F8024F287EED347199196E3B2F6DB1A
ctxprn64.dll	3BC9C1DAF3B6364C0517BFAD615D5B25
ctxrdpwsx.dll	5FB7FBAF0445BC9FA03CD9D14E9DB6E8
ctxrpc64.dll	5CCE0682064DAABF575BF4D1E249B92B
cupdres_de.dll	2CB14DF1A7C715CAC3FE7BE94129CE11
cupdres_en.dll	5787E240B1D422381443B50D01B446F2
cupdres_es.dll	39D0EB528A921BC5A2AB4BD1C7783A2D
cupdres_fr.dll	483B8F97B073F907E5DA108BDECB99BC
cupdres_ja.dll	72825D097ADD1F52D1438939BB630A70
DefaultCapabilities.xml	A71B63C0D4E12317BEC4768D704B684E
MFErrorUI.dll	C63C8785CCD4E18A216DB80CF8C46092
msi50ca.dll	A70D189F1F10D5379B999646873D7D6F
SemsComHosting.dll	F05BC594094B24CE81456687010E3BC9
SemsComLibrary.dll	67D6DE4BA5B86ECFFDAF3AB092EBC40B
SemsComLibrary.tlb	ECBA3E037D794A02739ED700058829A9
SemsComPluginTypes.dll	CD65896188FF820F9469C1ED6FDC4915
SemsComPluginTypes.tlb	CB6EE2AB96860711CD8FBF898BC9FA60
SemsLibrary.dll	1EAC36766239408D852A65BCDB5AA4D4
SemsService.exe	32C5E1D7822D76CF6B95782EA4DDAC57
vdtw30.dll	57B2024DCBE29F7F80936121F1D96607
wdica.sys	2D06017A686DAE2BF03E4FE923601997
wfapi64.dll	4764BAD82361E681DBB182DEDD3CFDBF
wsxica.dll	5B3AA72E5804ADA546086D4853C793FC
cdfdrv.cat (driverfiles)	0E5504121D32ECCB76C01091E7DD617D
citrixupd.cat (driverfiles)	63526BDCF7BE9C6ABDD1A0DFEA50FD5F
CitrixUpd.inf (driverfiles)	AD3D2B5531D30A6D2E4A70A4EDC36292
wdica.cat (driverfiles)	A8D27B1E9306A0F7F80224F48E646FF1
wdica.inf (driverfiles)	84070ADE8E7A421004ADC785DB99DA89
cdfdrv.sys (x32)	B111CDDFB3024B7BFD54A18D84277F0F
CdfSvc.exe (x32)	3270D51D394FEB222E3F60CF32B82FCE
CdfSvcPS.dll (x32)	DB513B4B73720540F88895A8356C2EE4
cdmprov.dll (x32)	DE4F2B9B9F5976B0E73B4184A6E80899
Citrix.Diagnostics.dll (x32)	2E529801543FA6589110A05511B19B8E
Citrix.Diagnostics.Recorder.Cdf.dll (x32)	AE71890C773BD53DA4CEF83A5464A39A
CitrixUpd.txt (x32)	229724BBF021E9C6CDB2959A2E355341
CitrixXps.txt (x32)	229724BBF021E9C6CDB2959A2E355341
Citrixxps.xml (x32)	26508E14D1E3C685D07B24DC952F7EF3
ComPlugin.dll (x32)	ADB0D9476574D6F29A5A0BCE1C3D1FB1
ctxprn.dll (x32)	090D9229AA3E1F5AA6EA97B1932EF8A1
ctxrpc.dll (x32)	48620BF0D1505D9B495A074C383CF77D
cupdres_de.dll (x32)	13CCFDBAA6EFB09B0A46C0F8E5F9C42F
cupdres_en.dll (x32)	D5B7D46AA706393C5A0DCFE19A4B94CD
cupdres_es.dll (x32)	EE2E57FB85CE43B63FDDB7C4063D4BB6
cupdres_fr.dll (x32)	F7341D9DD6D5466E8E65FEB1FA35AE65
cupdres_ja.dll (x32)	055DE2ADD94D922135CE067790968F8E
DefaultCapabilities.xml (x32)	A71B63C0D4E12317BEC4768D704B684E
icactls.dll (x32)	59F7ABBA82BC193C906C3989B3CD3786
icast.exe (x32)	33AE5D00E063D19ED5C062B418FD35DF
ImaObjectPermissions.dll (x32)	C1EA891EB958E8AE2C2B24A4E44D23C2
ImaSrv.exe (x32)	964B088F36759D2A147FEAC545C87A17
ImaSrvSs.dll (x32)	E9D42C969C3F1BF641FD423494030125
MfAppSs.dll (x32)	9C774775757216203F7FF99BD35E46A2
MFErrorUI.dll (x32)	7D86C4B1D026BE24D286F7593EF7DAD3
MfRpcSs.dll (x32)	67E998292EEE047042294EB430FB6A4C
MfSrvSs.dll (x32)	1E85B1397AE50875C3EA9B7F7582B2F3
policy.1.0.Citrix.Diagnostics.config (x32)	F48E6C6E330F39C240D9E13D473D3891
policy.1.0.Citrix.Diagnostics.dll (x32)	911BDE6BC2050CA8C9AE08EA067849FF
RADEAppSs.dll (x32)	B014A607712F662B96FDA35622ED7D9A
RADESessionSs.dll (x32)	9D3B238FEE8DE08F013A49E83226B39C
SemsComHosting.dll (x32)	A2162329CE9DB32BB8A3B07FF53B57C4
SemsComLibrary.dll (x32)	1D1F0FFDFDFC03050625F65AA2C88420
SemsComLibrary.tlb (x32)	ECBA3E037D794A02739ED700058829A9
SemsComPluginTypes.dll (x32)	163B46CFF52BF66C3D80621A25985395
SemsComPluginTypes.tlb (x32)	CB6EE2AB96860711CD8FBF898BC9FA60
SemsLibrary.dll (x32)	B4752988830A830C19325A28D090B6DD
SemsService.exe (x32)	4BE84AD4A64D033E00C5719B01CEA683
wfapi.dll (x32)	CE6C2B6E03D15FE696FCFE32D6AC1D57
wshadow.exe (x32)	E17278E76944F7A72A019B69CB39211D
cdfdrv.cat (x32\driverfiles)	DC662B04C163038B3733946D139C2AF5
cdfdrv.inf (x32\driverfiles)	FBFB51CBC8A41D7BC008C24BFD30448E

Copyright ?? 2011 Citrix Systems, Inc. All rights reserved.
Citrix is a registered trademark, and Citrix Presentation Server and Citrix XenApp are trademarks of Citrix Systems, Inc. in the United States and other countries.
All other trademarks and registered trademarks are the property of their respective owners.